ESI-MIB :: trRouting

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ESI-MIB › trRouting

trRouting

Module: ESI-MIB

OID (symbolic): ESI-MIB::trRouting

OID (numeric): 1.3.6.1.4.1.683.5.3.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Set this variable to change the source routing configuration on the device.

Off: No source routing.

All, None: All-routes broadcast, nonbroadcast return. The frame will be transmitted on every route within the network resulting in multiple copies on a given ring.

Single, All: Single-route broadcast, all routes broadcast return. The frame will be transmitted across the designated bridges, which will result in the frame appearing only once on each ring. The response frame is on all routes broadcast to the originator.

Single, None: Single-route broadcast, nonbroadcast return. The frame will be transmitted across designated bridges, which will result in the frame appearing only once each ring.

In order for changes to this variable to take effect, the device must be reset. See cmdReset to do this.

What is trRouting?

Configures Token Ring source-routing behavior: off, all-routes broadcast/nonbroadcast return, single-route broadcast/all-routes return, or single-route broadcast/nonbroadcast return. Bridge network admins pick the mode matching their ring topology to avoid duplicate frames; requires a reset to take effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.5.3.4
snmpwalk -v2c -c public <target> ESI-MIB::trRouting

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.683.5.3.4.1
snmpget -v2c -c public <target> ESI-MIB::trRouting.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.683.5.3.4.1 i <value>

Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::trRouting OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.683esiESI-MIB
1.3.6.1.4.1.683.5tokenRingESI-MIB
1.3.6.1.4.1.683.5.3trConfigureESI-MIB
1.3.6.1.4.1.683.5.3.4trRoutingESI-MIB