All MIBs › ESI-MIB › trPacketSize
trPacketSize
Module: ESI-MIB
OID (symbolic): ESI-MIB::trPacketSize
OID (numeric): 1.3.6.1.4.1.683.5.3.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: You should only change the packet size if you are using a driver for your Token Ring adapter which allows packet sizes greater than One_K.
In order for changes to this variable to take effect, the device must be reset. See cmdReset to do this.
What is trPacketSize?
Sets the maximum Token Ring frame size the adapter will use: one-k(1), two-k(2), or four-k(3). Per the description, it should only be changed if the driver supports frames larger than 1K; a reset is required afterward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.5.3.3 snmpwalk -v2c -c public <target> ESI-MIB::trPacketSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.683.5.3.3.1 snmpget -v2c -c public <target> ESI-MIB::trPacketSize.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.683.5.3.3.1 i <value>
Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::trPacketSize OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.683 | esi | ESI-MIB |
| 1.3.6.1.4.1.683.5 | tokenRing | ESI-MIB |
| 1.3.6.1.4.1.683.5.3 | trConfigure | ESI-MIB |
| 1.3.6.1.4.1.683.5.3.3 | trPacketSize | ESI-MIB |