All MIBs › ESI-MIB › tcpipBootProtocolsEnabled
tcpipBootProtocolsEnabled
Module: ESI-MIB
OID (symbolic): ESI-MIB::tcpipBootProtocolsEnabled
OID (numeric): 1.3.6.1.4.1.683.6.3.1.4.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the 16 bit mask which determines which boot
protocols will be used to determine the print server's
IP address.
BIT Boot Protocol Enabled
--- --------------------------
0 RARP
1 BootP
2 DHCP
3 Gleaning
4 Default Address Enabled (If no address after 2 minutes
timeout and go to 198.102.102.254)
A value of 31 indicates that all boot protocols are
enabled. These protocols will only be used if
tcpipUsingNetProtocols is set to 2.
In order for changes to this variable to take effect,
the print server must be reset. See cmdReset to do
this.What is tcpipBootProtocolsEnabled?
A bitmask selecting which address-discovery mechanisms are tried when tcpipUsingNetProtocols is enabled: bit 0 RARP, bit 1 BootP, bit 2 DHCP, bit 3 Gleaning, bit 4 a 2-minute-timeout default address (198.102.102.254). A value of 31 enables all of them; requires a device reset to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.6.3.1.4.5 snmpwalk -v2c -c public <target> ESI-MIB::tcpipBootProtocolsEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.683.6.3.1.4.5.1 snmpget -v2c -c public <target> ESI-MIB::tcpipBootProtocolsEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.683.6.3.1.4.5.1 i <value>
Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::tcpipBootProtocolsEnabled OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.683 | esi | ESI-MIB |
| 1.3.6.1.4.1.683.6 | printServers | ESI-MIB |
| 1.3.6.1.4.1.683.6.3 | psProtocols | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.1 | tcpip | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.1.4 | tcpipConfigure | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.1.4.5 | tcpipBootProtocolsEnabled | ESI-MIB |