ESI-MIB :: outputPrinter

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ESI-MIB › outputPrinter

outputPrinter

Module: ESI-MIB

OID (symbolic): ESI-MIB::outputPrinter

OID (numeric): 1.3.6.1.4.1.683.6.2.3.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The type of printer the output port is attached to.

Even if the group is supported, this variable may not be supported.

What is outputPrinter?

Identifies the make/model of printer attached to this output port, from a short enumerated list: hp-III(1), hp-IIISi(2), ibm(3), or no-Specific-Printer(4). Affects which of outputPCLString/outputPSString gets sent to the printer when language switching is active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.6.2.3.2.1.6
snmpwalk -v2c -c public <target> ESI-MIB::outputPrinter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.683.6.2.3.2.1.6.1
snmpget -v2c -c public <target> ESI-MIB::outputPrinter.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.683.6.2.3.2.1.6.1 i <value>

Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::outputPrinter OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.683esiESI-MIB
1.3.6.1.4.1.683.6printServersESI-MIB
1.3.6.1.4.1.683.6.2psOutputESI-MIB
1.3.6.1.4.1.683.6.2.3outputConfigureESI-MIB
1.3.6.1.4.1.683.6.2.3.2outputTableESI-MIB
1.3.6.1.4.1.683.6.2.3.2.1outputEntryESI-MIB
1.3.6.1.4.1.683.6.2.3.2.1.6outputPrinterESI-MIB