All MIBs › ESI-MIB › lmEnabled
lmEnabled
Module: ESI-MIB
OID (symbolic): ESI-MIB::lmEnabled
OID (numeric): 1.3.6.1.4.1.683.6.3.4.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether or not the Lan Manager protocol stack is enabled on the print server.
In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
What is lmEnabled?
A yes/no flag for whether the LAN Manager protocol stack is active on the print server. Legacy toggle retained for sites still running Microsoft/IBM LAN Manager networking; a device reset is required for the change to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.6.3.4.2 snmpwalk -v2c -c public <target> ESI-MIB::lmEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.683.6.3.4.2.1 snmpget -v2c -c public <target> ESI-MIB::lmEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.683.6.3.4.2.1 i <value>
Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::lmEnabled OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.683 | esi | ESI-MIB |
| 1.3.6.1.4.1.683.6 | printServers | ESI-MIB |
| 1.3.6.1.4.1.683.6.3 | psProtocols | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.4 | lanManager | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.4.2 | lmEnabled | ESI-MIB |