All MIBs › ESI-MIB › eTalkRestoreDefaults
eTalkRestoreDefaults
Module: ESI-MIB
OID (symbolic): ESI-MIB::eTalkRestoreDefaults
OID (numeric): 1.3.6.1.4.1.683.6.3.5.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A value of 2 will restore all EtherTalk parameters on the print server to factory defaults, as well as reset the print server.
What is eTalkRestoreDefaults?
Setting this to yes(2) restores all EtherTalk parameters (zone, name, network settings) to factory defaults and reboots the print server, scoped to just the EtherTalk subsystem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.6.3.5.3.1 snmpwalk -v2c -c public <target> ESI-MIB::eTalkRestoreDefaults
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.683.6.3.5.3.1.1 snmpget -v2c -c public <target> ESI-MIB::eTalkRestoreDefaults.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.683.6.3.5.3.1.1 i <value>
Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::eTalkRestoreDefaults OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.683 | esi | ESI-MIB |
| 1.3.6.1.4.1.683.6 | printServers | ESI-MIB |
| 1.3.6.1.4.1.683.6.3 | psProtocols | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.5 | eTalk | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.5.3 | eTalkCommands | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.5.3.1 | eTalkRestoreDefaults | ESI-MIB |