All MIBs › ESI-MIB › eTalkEnabled
eTalkEnabled
Module: ESI-MIB
OID (symbolic): ESI-MIB::eTalkEnabled
OID (numeric): 1.3.6.1.4.1.683.6.3.5.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether or not the EtherTalk protocol stack is enabled on the print server.
In order for changes to this variable to take effect, the print server must be reset. See cmdReset to do this.
What is eTalkEnabled?
A yes/no flag for whether the EtherTalk (AppleTalk-over-Ethernet) protocol stack is active on the print server. Mac-only print environments enable this; a device reset is required for the change to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.6.3.5.2 snmpwalk -v2c -c public <target> ESI-MIB::eTalkEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.683.6.3.5.2.1 snmpget -v2c -c public <target> ESI-MIB::eTalkEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.683.6.3.5.2.1 i <value>
Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::eTalkEnabled OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.683 | esi | ESI-MIB |
| 1.3.6.1.4.1.683.6 | printServers | ESI-MIB |
| 1.3.6.1.4.1.683.6.3 | psProtocols | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.5 | eTalk | ESI-MIB |
| 1.3.6.1.4.1.683.6.3.5.2 | eTalkEnabled | ESI-MIB |