cmdReset
Module: ESI-MIB
OID (symbolic): ESI-MIB::cmdReset
OID (numeric): 1.3.6.1.4.1.683.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A value of 2 will reset the device. The following list of variables will also cause the device to reset itself.
cmdRestoreDefaults, snmpRestoreDefaults, trRestoreDefaults, outputRestoreDefaults, tcpipRestoreDefaults, tcpipFirmwareUpgrade, nwRestoreDefaults, nwFirmwareUpgrade, bvRestoreDefaults, bvFirmwareUpgrade, eTalkRestoreDefaults
What is cmdReset?
Setting this to yes(2) reboots the print server immediately; reading it always returns no(1). Admins use it to apply pending changes flagged by genConfigurationDirty, since many settings such as tcpipIPAddress only take effect after a reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.683.2.2 snmpwalk -v2c -c public <target> ESI-MIB::cmdReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.683.2.2.1 snmpget -v2c -c public <target> ESI-MIB::cmdReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.683.2.2.1 i <value>
Start monitoring ESI-branded embedded network access equipment (vendor identity/inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESI-MIB::cmdReset OID value, configure state conditions and alerts, and monitor any ESI-branded embedded network access equipment (vendor identity/inventory) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.683 | esi | ESI-MIB |
| 1.3.6.1.4.1.683.2 | commands | ESI-MIB |
| 1.3.6.1.4.1.683.2.2 | cmdReset | ESI-MIB |