All MIBs › ES1000-MIB › swPortCtrlPriority
swPortCtrlPriority
Module: ES1000-MIB
OID (symbolic): ES1000-MIB::swPortCtrlPriority
OID (numeric): 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packets are always routed with high priority; packets with unknown unicast destination addresses are always routed with low priority. Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values.
default(2) - A packet is normally classified as low priority ,unless at least one of the following is true:
.The packet contained a TAG (per 802.1Q definition) with the priority greater or equal to 4. .The address-table entry for the destination address had Pd=HIGH.
force-low_priority(3) - A packet is normally classified as low priority. force-high_priority(4) - A packet is normally classified as high priority.
What is swPortCtrlPriority?
Sets the priority queue a port's incoming traffic is classified into, e.g. "force-high-priority" or "force-low-priority", overriding the switch's default classification rules for that port's non-BPDU/IGMP traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.9 snmpwalk -v2c -c public <target> ES1000-MIB::swPortCtrlPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.9.1 snmpget -v2c -c public <target> ES1000-MIB::swPortCtrlPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.9.1 i <value>
Start monitoring ES1000-series modular Ethernet switch (Marconi/D-Link 'Golf' platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ES1000-MIB::swPortCtrlPriority OID value, configure state conditions and alerts, and monitor any ES1000-series modular Ethernet switch (Marconi/D-Link 'Golf' platform) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.326 | marconi | ES1000-MIB |
| 1.3.6.1.4.1.326.2 | systems | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20 | external | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1 | dlink | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2 | golf | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2 | golfcommon | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2 | marconi_mgmt | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.24 | es1000Series | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3 | swPortPackage | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2 | swPortCtrlTable | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1 | swPortCtrlEntry | ES1000-MIB |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.9 | swPortCtrlPriority | ES1000-MIB |