ES-MODULE-MIB :: esModuleFlashStatus

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ES-MODULE-MIB › esModuleFlashStatus

esModuleFlashStatus

Module: ES-MODULE-MIB

OID (symbolic): ES-MODULE-MIB::esModuleFlashStatus

OID (numeric): 1.3.6.1.4.1.437.1.1.2.1.2.1.1.17

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: A string of up to 80 characters indicating the status of the firmware stored in the module's FLASH memory. The string includes the firmware revision, the data and time of the last upgrade, the source of the upgrade, as well as the validity of the firmware. The string is in net ASCII and conforms to one of the following formats: For the FDDI module:

For factory installed firmware:

' v1.00 factory installed: valid'

For out-of-band upgrades:

' v1.00 written 07-22-1994 08:19:15 from serial terminal: valid'

For in-band upgrades:

' v1.00 written 07-22-1994 12:19:15 from 192.009.200.200: invalid'

For the ATM module, the formats are similar, but the part of the string containing the version number is longer.

What is esModuleFlashStatus?

This is a descriptive string (up to 80 characters) reporting the module's FLASH firmware status, including its revision, when and how it was last upgraded (factory, serial terminal, or a specific in-band IP address), and whether it's currently valid or invalid. An admin reads this to audit exactly how and when a module's firmware was last updated, and to catch a firmware image marked invalid before it causes problems.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.437.1.1.2.1.2.1.1.17
snmpwalk -v2c -c public <target> ES-MODULE-MIB::esModuleFlashStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.437.1.1.2.1.2.1.1.17.1
snmpget -v2c -c public <target> ES-MODULE-MIB::esModuleFlashStatus.1

Start monitoring Grand Junction Networks / early Cisco ES-series modular Ethernet switch chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ES-MODULE-MIB::esModuleFlashStatus OID value, configure state conditions and alerts, and monitor any Grand Junction Networks / early Cisco ES-series modular Ethernet switch chassis from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.437grandjunctionES-MODULE-MIB
1.3.6.1.4.1.437.1productsES-MODULE-MIB
1.3.6.1.4.1.437.1.1fastLinkES-MODULE-MIB
1.3.6.1.4.1.437.1.1.2seriesG2xxES-MODULE-MIB
1.3.6.1.4.1.437.1.1.2.1esModuleBasicES-MODULE-MIB
1.3.6.1.4.1.437.1.1.2.1.2esModuleInfoES-MODULE-MIB
1.3.6.1.4.1.437.1.1.2.1.2.1esModuleTableES-MODULE-MIB
1.3.6.1.4.1.437.1.1.2.1.2.1.1esModuleEntryES-MODULE-MIB
1.3.6.1.4.1.437.1.1.2.1.2.1.1.17esModuleFlashStatusES-MODULE-MIB