ERICSSON-ROUTER-RADIUS-MIB :: eriRouterRadiusAcctSrvTimeout

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERICSSON-ROUTER-RADIUS-MIB › eriRouterRadiusAcctSrvTimeout

eriRouterRadiusAcctSrvTimeout

Module: ERICSSON-ROUTER-RADIUS-MIB

OID (symbolic): ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctSrvTimeout

OID (numeric): 1.3.6.1.4.1.193.218.2.32.1.2.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The maximum amount of time to wait for any response from a RADIUS accounting server before assuming the server is unreachable.

A value of '0' indicates that there is no timeout value. In this case a server is considered to be unreachable when no response is received within the eriRouterRadiusAcctPktTimeout window.

Note: if the system is using a RADIUS server for both authorization and accounting, this object's value will be ignored for that server. Instead the eriRouterRadiusAuthSrvTimeout value will be used for that server.

The SNMP set command is not supported for this MIB attribute.

What is eriRouterRadiusAcctSrvTimeout?

Total time before an accounting RADIUS server is marked unreachable; a value of 0 disables the server-level timeout so only the per-packet timeout applies. When a server does double duty for auth and accounting, the auth server's timeout value overrides this one.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.32.1.2.2
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctSrvTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.32.1.2.2.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctSrvTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.218.2.32.1.2.2.1 i <value>

Start monitoring Ericsson SmartEdge/SM/SSR broadband/edge router (Redback Networks heritage) (RADIUS auth/accounting server extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctSrvTimeout OID value, configure state conditions and alerts, and monitor any Ericsson SmartEdge/SM/SSR broadband/edge router (Redback Networks heritage) (RADIUS auth/accounting server extensions) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.32eriRouterRadiusMibERICSSON-ROUTER-RADIUS-MIB
1.3.6.1.4.1.193.218.2.32.1eriRouterRadiusMIBObjectsERICSSON-ROUTER-RADIUS-MIB
1.3.6.1.4.1.193.218.2.32.1.2eriRouterRadiusAcctObjectsERICSSON-ROUTER-RADIUS-MIB
1.3.6.1.4.1.193.218.2.32.1.2.2eriRouterRadiusAcctSrvTimeoutERICSSON-ROUTER-RADIUS-MIB