ERICSSON-ROUTER-RADIUS-MIB :: eriRouterRadiusAcctDeadtime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERICSSON-ROUTER-RADIUS-MIB › eriRouterRadiusAcctDeadtime

eriRouterRadiusAcctDeadtime

Module: ERICSSON-ROUTER-RADIUS-MIB

OID (symbolic): ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctDeadtime

OID (numeric): 1.3.6.1.4.1.193.218.2.32.1.2.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: After a RADIUS accounting server has been transitioned to 'down' it will be assumed to be unreachable for this interval. After that point the system may start sending accounting records to the server again.

A value of '0' indicates the system may start sending records to the server immediately.

Note: if the system is using a RADIUS server for both authorization and accounting, this object's value will be ignored for that server. Instead the eriRouterRadiusAuthDeadtime value will be used for that server.

The SNMP set command is not supported for this MIB attribute.

What is eriRouterRadiusAcctDeadtime?

Minutes an accounting RADIUS server is held 'down' before the router resumes sending accounting records to it; 0 allows immediate retry. If the server also handles authentication, eriRouterRadiusAuthDeadtime governs instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.218.2.32.1.2.3
snmpwalk -v2c -c public <target> ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctDeadtime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.218.2.32.1.2.3.1
snmpget -v2c -c public <target> ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctDeadtime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.218.2.32.1.2.3.1 i <value>

Start monitoring Ericsson SmartEdge/SM/SSR broadband/edge router (Redback Networks heritage) (RADIUS auth/accounting server extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERICSSON-ROUTER-RADIUS-MIB::eriRouterRadiusAcctDeadtime OID value, configure state conditions and alerts, and monitor any Ericsson SmartEdge/SM/SSR broadband/edge router (Redback Networks heritage) (RADIUS auth/accounting server extensions) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.218eriRouterSMIERICSSON-ROUTER-SMI
1.3.6.1.4.1.193.218.2eriRouterMgmtERICSSON-ROUTER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.218.2.32eriRouterRadiusMibERICSSON-ROUTER-RADIUS-MIB
1.3.6.1.4.1.193.218.2.32.1eriRouterRadiusMIBObjectsERICSSON-ROUTER-RADIUS-MIB
1.3.6.1.4.1.193.218.2.32.1.2eriRouterRadiusAcctObjectsERICSSON-ROUTER-RADIUS-MIB
1.3.6.1.4.1.193.218.2.32.1.2.3eriRouterRadiusAcctDeadtimeERICSSON-ROUTER-RADIUS-MIB