All MIBs › ERI-DNX-T3-MIB › t3T1CfgCmdStatus
t3T1CfgCmdStatus
Module: ERI-DNX-T3-MIB
OID (symbolic): ERI-DNX-T3-MIB::t3T1CfgCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.2.1.1.2.1.12
Node type: OBJECT-TYPE
Type: LinkCmdStatus
Access: read-write
Description: The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
T3-T1 Link Commands used in SET Command (1..99) update-link-config(1) Change existing Link Configuration inServiceAll (7) Change Link Status to in-service for all 8 links. copyToAll (9) Copy T1 Link configuration to all other links within the same device outOfServiceAll (12) Change Link Status to out-of-service for all 8 links.
Response States used in GET RESPONSE Command (100..199) update-successful (101) Link data has been successfully changed insvc-successful (107) All Links have been successfully placed In Service copy-successful (109) T1 Link data has been successfully copied to other links oos-successful (112) All Links have been successfully placed Out of Service
T3-T1 Link Config Error Codes used in GET RESPONSE Command (200..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-esf-format (405) ESF type not applicable to link type err-invalid-link-density (406) Unrecognized T1 link density setting err-invalid-network-loop (410) Unrecognized network loop setting err-invalid-yellow-alrm (411) Unrecognized yellow alarm setting err-invalid-red-timeout (412) Unrecognized red alarm timeout err-invalid-idle-code (413) Unrecognized idle code err-device-in-standby (414) Can't change config for designated Standby device err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is t3T1CfgCmdStatus?
A command/response control for this DS1 channel: an admin writes a command such as update-link-config, inServiceAll, copyToAll, or outOfServiceAll to apply a configuration action, and the agent overwrites the value with a response code (e.g. 107 for 'all links placed in service' or an error code for a failure) reporting the outcome.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.1.1.2.1.12 snmpwalk -v2c -c public <target> ERI-DNX-T3-MIB::t3T1CfgCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.1.1.2.1.12.1 snmpget -v2c -c public <target> ERI-DNX-T3-MIB::t3T1CfgCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.1.1.2.1.12.1 s <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (T3/DS3 interface card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-T3-MIB::t3T1CfgCmdStatus OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (T3/DS3 interface card) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.1 | dnxT3 | ERI-DNX-T3-MIB |
| 1.3.6.1.4.1.644.2.4.2.1.1 | t3Config | ERI-DNX-T3-MIB |
| 1.3.6.1.4.1.644.2.4.2.1.1.2 | t3T1LinkConfigTable | ERI-DNX-T3-MIB |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1 | t3T1LinkConfigEntry | ERI-DNX-T3-MIB |
| 1.3.6.1.4.1.644.2.4.2.1.1.2.1.12 | t3T1CfgCmdStatus | ERI-DNX-T3-MIB |