All MIBs › ERI-DNX-STS1-MIB › sts1MaprCmdStatus
sts1MaprCmdStatus
Module: ERI-DNX-STS1-MIB
OID (symbolic): ERI-DNX-STS1-MIB::sts1MaprCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.2.3.1.1.1.13
Node type: OBJECT-TYPE
Type: LinkCmdStatus
Access: read-write
Description: The command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
STS1 Link Commands used in SET Command (1..199) update-link-config(1), Change existing Link Configuration
Response States used in GET RESPONSE Command (200..399) update-successful (201) Link data has been successfully changed
STS1 Mapper Config Error Codes used in GET RESPONSE Command (400..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-link-op-mode (407) Configured M13 Op mode not valid for port; verify other link parameters match desired new mode err-invalid-link-rem-loop (408) Remote Loop type not valid for sts1 frame type err-invalid-link-ais (409) Unrecognized sts1 AIS selection err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is sts1MaprCmdStatus?
A write-then-read command/status register for this mapper row: an admin writes a command code such as update-link-config(1) to apply changes, and the device echoes back a result like update-successful(201) or an error code such as err-invalid-link-framing(402) so the change can be confirmed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.3.1.1.1.13 snmpwalk -v2c -c public <target> ERI-DNX-STS1-MIB::sts1MaprCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.3.1.1.1.13.1 snmpget -v2c -c public <target> ERI-DNX-STS1-MIB::sts1MaprCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.3.1.1.1.13.1 s <value>
Start monitoring ERI DNX SONET multiplexers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-STS1-MIB::sts1MaprCmdStatus OID value, configure state conditions and alerts, and monitor any ERI DNX SONET multiplexers from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.3 | dnxSTS1 | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.1 | sts1Config | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.1.1 | sts1MapperConfigTable | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1 | sts1MapperConfigEntry | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.1.1.1.13 | sts1MaprCmdStatus | ERI-DNX-STS1-MIB |