All MIBs › ERI-DNX-STS1-MIB › sts1MapperStatusCmdStatus
sts1MapperStatusCmdStatus
Module: ERI-DNX-STS1-MIB
OID (symbolic): ERI-DNX-STS1-MIB::sts1MapperStatusCmdStatus
OID (numeric): 1.3.6.1.4.1.644.2.4.2.3.2.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the command status for the Mapper Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row
Action Commands used in SET Command (1..99) update (1) Can be used optionally when activating loops and berts in order to get status code back in response clearErrors (14) Resets all error counters to zero
Response States used in GET RESPONSE Command (100..199) update-successful (101) Test action has been successfully performed clear-successful (114) Error counts have been successfully cleared
The Error Codes used in GET RESPONSE Command (200..799) err-general-test-error (200) Unknown Test request error occurred. err-field-cannot-be-set (206) Read-only field was included in SET request err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big
What is sts1MapperStatusCmdStatus?
A write/read command register for this mapper's status row: writing clearErrors(14) resets all its error counters to zero, and the device reports back a result such as clear-successful(114) or an error code like err-field-cannot-be-set(206) if the request was invalid.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.3.2.1.1.12 snmpwalk -v2c -c public <target> ERI-DNX-STS1-MIB::sts1MapperStatusCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.3.2.1.1.12.1 snmpget -v2c -c public <target> ERI-DNX-STS1-MIB::sts1MapperStatusCmdStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.3.2.1.1.12.1 i <value>
Start monitoring ERI DNX SONET multiplexers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-STS1-MIB::sts1MapperStatusCmdStatus OID value, configure state conditions and alerts, and monitor any ERI DNX SONET multiplexers from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.3 | dnxSTS1 | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.2 | sts1Diag | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.2.1 | sts1MapperStatusTable | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1 | sts1MapperStatusEntry | ERI-DNX-STS1-MIB |
| 1.3.6.1.4.1.644.2.4.2.3.2.1.1.12 | sts1MapperStatusCmdStatus | ERI-DNX-STS1-MIB |