ERI-DNX-PERF-MONT-MIB :: dsx1EsfCurrLinkAddr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERI-DNX-PERF-MONT-MIB › dsx1EsfCurrLinkAddr

dsx1EsfCurrLinkAddr

Module: ERI-DNX-PERF-MONT-MIB

OID (symbolic): ERI-DNX-PERF-MONT-MIB::dsx1EsfCurrLinkAddr

OID (numeric): 1.3.6.1.4.1.644.2.4.4.1.1.1.1

Node type: OBJECT-TYPE

Type: LinkPortAddress

Access: read-only

Description: This number uniquely identifies an DS1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid link number will vary depending on the specified carrier and framing options. For example, an octal T1/E1 device has 8 DS1 links however the DS3 has 28 DS1 links.

The 1st byte is reserved for future Nest Number use The 2nd byte represents the Slot Number (1-11) The 3rd byte represents the Link Number (1-84) The 4th byte is reserved for future use

What is dsx1EsfCurrLinkAddr?

A 4-byte address identifying a specific DS1/E1 link in this Eastern Research DNX chassis, encoding slot number (byte 2) and link number (byte 3) so it doubles as the table index for the current 15-minute performance interval. Admins use it to map an alarm or counter back to a physical port on a specific card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.4.1.1.1.1
snmpwalk -v2c -c public <target> ERI-DNX-PERF-MONT-MIB::dsx1EsfCurrLinkAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.4.1.1.1.1.1
snmpget -v2c -c public <target> ERI-DNX-PERF-MONT-MIB::dsx1EsfCurrLinkAddr.1

Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS1/T1 performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-PERF-MONT-MIB::dsx1EsfCurrLinkAddr OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS1/T1 performance monitoring) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.644eriEnterpriseRootERI-ROOT-SMI
1.3.6.1.4.1.644.2eriProductsERI-ROOT-SMI
1.3.6.1.4.1.644.2.4dnxERI-DNX-SMC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.644.2.4.4performanceMonitoringERI-DNX-PERF-MONT-MIB
1.3.6.1.4.1.644.2.4.4.1dsx1EsfERI-DNX-PERF-MONT-MIB
1.3.6.1.4.1.644.2.4.4.1.1dsx1EsfCurrTableERI-DNX-PERF-MONT-MIB
1.3.6.1.4.1.644.2.4.4.1.1.1dsx1EsfCurrEntryERI-DNX-PERF-MONT-MIB
1.3.6.1.4.1.644.2.4.4.1.1.1.1dsx1EsfCurrLinkAddrERI-DNX-PERF-MONT-MIB