All MIBs › ERI-DNX-OCTAL-HIGH-SPEED-MIB › oHSCfgCtsIndication
oHSCfgCtsIndication
Module: ERI-DNX-OCTAL-HIGH-SPEED-MIB
OID (symbolic): ERI-DNX-OCTAL-HIGH-SPEED-MIB::oHSCfgCtsIndication
OID (numeric): 1.3.6.1.4.1.644.2.4.2.5.1.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A Control Signal configuration used on this port. When the Port type is X.21, this field represents the X.21 Control Signals. In all other cases, this is the Clear to Send method. forced-off (0) method is off forced-on (1) method is on track-RTS (2) asserts Request to Send (RTS) each time data needs to be transmitted and drops RTS at some point after data transmission begins.
What is oHSCfgCtsIndication?
oHSCfgCtsIndication configures the port's Clear to Send behavior (or, for X.21 ports, its X.21 Control Signals): forced off, forced on, or tracking Request to Send. Admins set track-RTS so the port asserts this signal each time it needs to transmit and drops it shortly after, matching standard flow-control handshaking expected by the attached equipment. For example, an admin configuring a modem-like device on this port would set oHSCfgCtsIndication to track-RTS(2) so CTS properly follows the DTE's RTS assertions during each transmission burst.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.5.1.1.1.14 snmpwalk -v2c -c public <target> ERI-DNX-OCTAL-HIGH-SPEED-MIB::oHSCfgCtsIndication
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.5.1.1.1.14.1 snmpget -v2c -c public <target> ERI-DNX-OCTAL-HIGH-SPEED-MIB::oHSCfgCtsIndication.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.5.1.1.1.14.1 i <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal high-speed serial port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-OCTAL-HIGH-SPEED-MIB::oHSCfgCtsIndication OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (octal high-speed serial port module) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.5 | dnxOHS | ERI-DNX-OCTAL-HIGH-SPEED-MIB |
| 1.3.6.1.4.1.644.2.4.2.5.1 | ohsConfig | ERI-DNX-OCTAL-HIGH-SPEED-MIB |
| 1.3.6.1.4.1.644.2.4.2.5.1.1 | oHSConfigTable | ERI-DNX-OCTAL-HIGH-SPEED-MIB |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1 | oHSConfigEntry | ERI-DNX-OCTAL-HIGH-SPEED-MIB |
| 1.3.6.1.4.1.644.2.4.2.5.1.1.1.14 | oHSCfgCtsIndication | ERI-DNX-OCTAL-HIGH-SPEED-MIB |