Description: The command status for this port configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure.

Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row

High Speed Port Commands used in SET Command (1..99) update-link-config(1) Change existing Port Configuration inServiceAll (7) Change Link Status to in-service for all 8 ports. copyToAll (9) Copy HS Port configuration to all other ports within the same device outOfServiceAll (12) Change Link Status to out-of-service for all 8 ports.

Response States used in GET RESPONSE Command (100..199) update-successful (101) Port data has been successfully changed insvc-successful (107) All Ports have been successfully placed In Service copy-successful (109) HS Port data has been successfully copied to other ports oos-successful (112) All Ports have been successfully placed Out of Service

High Speed Port Config Error Codes used in GET RESPONSE Command (200..699) err-general-link-config-error (400) Unknown HS port configuration error occurred err-invalid-link-status (401) Unrecognized HS port status setting err-invalid-link-command (403) Unrecognized HS port command-action err-invalid-link-op-mode (407) Unrecognized HS port Mode err-invalid-link-rem-loop (408) Unrecognized or not applicable DTE Loop err-invalid-network-loop (410) Unrecognized network loop setting err-invalid-interface (419) Unrecognized or not applicable HS Type err-invalid-polarity (420) Unrecognized polarity setting err-invalid-clock-timing (421) Unrecognized clock setting err-invalid-control-signal (422) Unrecognized Control setting err-dcd-dsr-not-applicable (423) DCD/DSR not configurable with X.21 err-requires-special-mode (424) Field not configurable in non-Special Mode err-cts-not-applicable (425) CTS not configurable in Special Mode err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too big