All MIBs › ERI-DNX-LINK-TEST-MIB › dsx1TestLinkLoop
dsx1TestLinkLoop
Module: ERI-DNX-LINK-TEST-MIB
OID (symbolic): ERI-DNX-LINK-TEST-MIB::dsx1TestLinkLoop
OID (numeric): 1.3.6.1.4.1.644.2.4.5.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the status of the line loopback associated with this link. In order to turn on a loop, the link must be configured In Service. off (0) - indicates loopback is disabled local (1) - indicates local data is looped back to itself remote (2) - indicates data is looped back from remote to local not applicable to links configured for Clear mode line (3) - entire Frame is looped, framing is not regenerated payload (4) - only payload data is looped, framing is regenerated not applicable to links configured for Clear mode analog (5) - LIU is looped back remoteLine (7) - Remote Line (network) loop indicator, CANNOT be used in SET. smartjack (6) - special remote loop for 'smartjack' devices not applicable to links configured for Clear mode user-defined (8) - user defined loop applicable for T1 links. allLocal (12) - places all links are in local loop allLine (16) - places all links are in line loop loopUpReq (74) - Remote loop status indicator, CANNOT be used in SET. loopDwnReq (75) - Remote loop status indicator, CANNOT be used in SET.
What is dsx1TestLinkLoop?
Controls the loopback mode on a DS1/E1 link, with values like off(0), local(1), remote(2), line(3), or smartjack(6). A technician sets this to line or remote loop to isolate whether a circuit fault is on the local equipment side or out on the carrier's line during troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.5.1.1.1.4 snmpwalk -v2c -c public <target> ERI-DNX-LINK-TEST-MIB::dsx1TestLinkLoop
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.5.1.1.1.4.1 snmpget -v2c -c public <target> ERI-DNX-LINK-TEST-MIB::dsx1TestLinkLoop.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.5.1.1.1.4.1 i <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS1/HS port BERT/loopback diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-LINK-TEST-MIB::dsx1TestLinkLoop OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS1/HS port BERT/loopback diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.5 | diagnostics | ERI-DNX-LINK-TEST-MIB |
| 1.3.6.1.4.1.644.2.4.5.1 | dsx1Test | ERI-DNX-LINK-TEST-MIB |
| 1.3.6.1.4.1.644.2.4.5.1.1 | dsx1TestTable | ERI-DNX-LINK-TEST-MIB |
| 1.3.6.1.4.1.644.2.4.5.1.1.1 | dsx1TestEntry | ERI-DNX-LINK-TEST-MIB |
| 1.3.6.1.4.1.644.2.4.5.1.1.1.4 | dsx1TestLinkLoop | ERI-DNX-LINK-TEST-MIB |