All MIBs › ERI-DNX-DS0-DP-MIB › ds0dpDiagNetLoop
ds0dpDiagNetLoop
Module: ERI-DNX-DS0-DP-MIB
OID (symbolic): ERI-DNX-DS0-DP-MIB::ds0dpDiagNetLoop
OID (numeric): 1.3.6.1.4.1.644.2.4.2.6.2.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the current latching DS0 Dataport loopback code on the network side (T1 digital line side) for this port. In order to turn on a loop, the port must be configured In Service with a Connection. off (0) - indicates network loopback is disabled local (5) - the incoming DS0 data from the far end enters the DS0DP and is looped back towards the far end. Also, the DS0DP sends the DDS Mux-Out-Of-Sync-Code in place of the DS0 data from the network towards the drop. ocu (45)- triggers the DS0DP to send a standard DDS OCU loop code towards the far end. csu (46)- triggers the DS0DP to send a standard DDS CSU loop code towards the far end. ds0ToNet (47) - loops the DS0 data towards the network side. ds0FromNet(48) - loops the DS0 data from the network side.
What is ds0dpDiagNetLoop?
Sets a latching loopback code toward the network side (the T1 digital line side): off(5) disables it, local(44) loops incoming far-end DS0 data back toward the far end, ocu(45)/csu(46) send standard DDS loop codes toward the far end, and ds0ToNet(47)/ds0FromNet(48) loop DS0 data to or from the network. As with ds0dpDiagDropLoop, the port must be in-service with a connection first; admins use this to isolate faults to the network-side circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.6.2.1.1.6 snmpwalk -v2c -c public <target> ERI-DNX-DS0-DP-MIB::ds0dpDiagNetLoop
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.6.2.1.1.6.1 snmpget -v2c -c public <target> ERI-DNX-DS0-DP-MIB::ds0dpDiagNetLoop.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.6.2.1.1.6.1 i <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS0 Drop-and-Insert Port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-DS0-DP-MIB::ds0dpDiagNetLoop OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS0 Drop-and-Insert Port module) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.6 | dnxDS0DP | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2 | ds0DpDiag | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2.1 | ds0dpPortDiagTable | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1 | ds0dpPortDiagEntry | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.6 | ds0dpDiagNetLoop | ERI-DNX-DS0-DP-MIB |