All MIBs › ERI-DNX-DS0-DP-MIB › ds0dpDiagBertState
ds0dpDiagBertState
Module: ERI-DNX-DS0-DP-MIB
OID (symbolic): ERI-DNX-DS0-DP-MIB::ds0dpDiagBertState
OID (numeric): 1.3.6.1.4.1.644.2.4.2.6.2.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates the current BERT test running and can be used to start and stop a desired Test Period. In order to turn on a bert, the port must be configured In Service. bertOff (51) - indicates BERT test is not running dropAllOnes (93) - sends All Ones Bert pattern to Drop drop511 (94) - sends 511 Bert pattern to Drop drop2047 (95) - sends 2047 Bert pattern to Drop dropQRSS (96) - sends QRSS Bert pattern to Drop netAllOnes (97) - sends All Ones Bert pattern to Network net511 (98) - sends 511 Bert pattern to Network net2047 (99) - sends 2047 Bert pattern to Network netQRSS (100) - sends QRSS Bert pattern to Network
What is ds0dpDiagBertState?
Starts or stops a Bit Error Rate Test pattern on this port and reports which one is running: bertOff(51) means no test, and the drop*/net* values send All-Ones, 511, 2047, or QRSS patterns toward the drop or network side respectively. The port must be in-service before a BERT can be started; admins run this to verify a circuit is error-free end to end before turning it over to production traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.6.2.1.1.7 snmpwalk -v2c -c public <target> ERI-DNX-DS0-DP-MIB::ds0dpDiagBertState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.644.2.4.2.6.2.1.1.7.1 snmpget -v2c -c public <target> ERI-DNX-DS0-DP-MIB::ds0dpDiagBertState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.644.2.4.2.6.2.1.1.7.1 i <value>
Start monitoring Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS0 Drop-and-Insert Port module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERI-DNX-DS0-DP-MIB::ds0dpDiagBertState OID value, configure state conditions and alerts, and monitor any Eastern Research Inc. (ERI) DNX digital cross-connect/multiplexer (DS0 Drop-and-Insert Port module) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.644 | eriEnterpriseRoot | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2 | eriProducts | ERI-ROOT-SMI |
| 1.3.6.1.4.1.644.2.4 | dnx | ERI-DNX-SMC-MIB |
| 1.3.6.1.4.1.644.2.4.2 | devices | ERI-DNX-SMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.644.2.4.2.6 | dnxDS0DP | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2 | ds0DpDiag | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2.1 | ds0dpPortDiagTable | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1 | ds0dpPortDiagEntry | ERI-DNX-DS0-DP-MIB |
| 1.3.6.1.4.1.644.2.4.2.6.2.1.1.7 | ds0dpDiagBertState | ERI-DNX-DS0-DP-MIB |