ENTERASYS-WIFI-PROTECTED-ACCESS-MIB :: etsysWPAConfigPSKPassPhrase

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › ENTERASYS-WIFI-PROTECTED-ACCESS-MIB › etsysWPAConfigPSKPassPhrase

etsysWPAConfigPSKPassPhrase

Module: ENTERASYS-WIFI-PROTECTED-ACCESS-MIB

OID (symbolic): ENTERASYS-WIFI-PROTECTED-ACCESS-MIB::etsysWPAConfigPSKPassPhrase

OID (numeric): 1.3.6.1.4.1.5624.1.2.32.1.1.1.13

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The PSK, for when WPA in PSK mode is the selected authentication suite, is configured by etsysWPAConfigPSKValue.

An alternative manner of setting the PSK uses the password-to-key algorithm defined in section XXX. This variable provides a means to enter a pass phrase. When this object is written, the WPA entity shall use the password-to-key algorithm specified in section XXX to derive a pre-shared key and populate etsysWPAConfigPSKValue with this key.

This object is logically write-only. Reading this variable shall return unsuccessful status or null or zero.

What is etsysWPAConfigPSKPassPhrase?

A human-typeable pass phrase that the AP runs through the WPA password-to-key algorithm to derive and populate etsysWPAConfigPSKValue; like the raw key, it is write-only and always reads back as null/zero, so admins use this as the practical way to set a WPA-PSK network's shared password.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.32.1.1.1.13
snmpwalk -v2c -c public <target> ENTERASYS-WIFI-PROTECTED-ACCESS-MIB::etsysWPAConfigPSKPassPhrase

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.32.1.1.1.13.1
snmpget -v2c -c public <target> ENTERASYS-WIFI-PROTECTED-ACCESS-MIB::etsysWPAConfigPSKPassPhrase.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.32.1.1.1.13.1 s <value>

Start monitoring Enterasys/Extreme Networks wireless access point/controller (WPA/TKIP wireless security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-WIFI-PROTECTED-ACCESS-MIB::etsysWPAConfigPSKPassPhrase OID value, configure state conditions and alerts, and monitor any Enterasys/Extreme Networks wireless access point/controller (WPA/TKIP wireless security) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.32etsysWiFiProtectedAccessMIBENTERASYS-WIFI-PROTECTED-ACCESS-MIB
1.3.6.1.4.1.5624.1.2.32.1etsysWiFiProtectedAccessObjectsENTERASYS-WIFI-PROTECTED-ACCESS-MIB
1.3.6.1.4.1.5624.1.2.32.1.1etsysWPAConfigTableENTERASYS-WIFI-PROTECTED-ACCESS-MIB
1.3.6.1.4.1.5624.1.2.32.1.1.1etsysWPAConfigEntryENTERASYS-WIFI-PROTECTED-ACCESS-MIB
1.3.6.1.4.1.5624.1.2.32.1.1.1.13etsysWPAConfigPSKPassPhraseENTERASYS-WIFI-PROTECTED-ACCESS-MIB