All MIBs › ENTERASYS-VLAN-AUTHORIZATION-MIB › etsysVlanAuthorizationStatus
etsysVlanAuthorizationStatus
Module: ENTERASYS-VLAN-AUTHORIZATION-MIB
OID (symbolic): ENTERASYS-VLAN-AUTHORIZATION-MIB::etsysVlanAuthorizationStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.1
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The enabled/disabled status for the application of VLAN authorization on this port, if disabled, the information returned in the VLAN-Tunnel-Type from the authentication will not be applied to the port (although it should be represented in this table). If enabled, those results will be applied to the port.
What is etsysVlanAuthorizationStatus?
This per-port setting determines whether VLAN authorization results are actually applied to that specific port, even though the feature is on globally; if disabled here, any VLAN assignment returned by authentication is recorded but not enforced on the port. Administrators use this to selectively exclude certain ports -- like uplinks or ports with special static VLAN needs -- from having their VLAN membership altered by user authentication, while still allowing it on general access ports. For example, an admin might leave this enabled on user-facing access ports but disable it on a trunk port connecting to another switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-VLAN-AUTHORIZATION-MIB::etsysVlanAuthorizationStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-VLAN-AUTHORIZATION-MIB::etsysVlanAuthorizationStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (RADIUS-based dynamic VLAN assignment, RFC 3580) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-VLAN-AUTHORIZATION-MIB::etsysVlanAuthorizationStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (RADIUS-based dynamic VLAN assignment, RFC 3580) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.48 | etsysVlanAuthorizationMIB | ENTERASYS-VLAN-AUTHORIZATION-MIB |
| 1.3.6.1.4.1.5624.1.2.48.1 | etsysVlanAuthorizationObjects | ENTERASYS-VLAN-AUTHORIZATION-MIB |
| 1.3.6.1.4.1.5624.1.2.48.1.2 | etsysVlanAuthorizationPorts | ENTERASYS-VLAN-AUTHORIZATION-MIB |
| 1.3.6.1.4.1.5624.1.2.48.1.2.1 | etsysVlanAuthorizationTable | ENTERASYS-VLAN-AUTHORIZATION-MIB |
| 1.3.6.1.4.1.5624.1.2.48.1.2.1.1 | etsysVlanAuthorizationEntry | ENTERASYS-VLAN-AUTHORIZATION-MIB |
| 1.3.6.1.4.1.5624.1.2.48.1.2.1.1.1 | etsysVlanAuthorizationStatus | ENTERASYS-VLAN-AUTHORIZATION-MIB |