All MIBs › ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB › etsysTxqMonitorEnableState
etsysTxqMonitorEnableState
Module: ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB
OID (symbolic): ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB::etsysTxqMonitorEnableState
OID (numeric): 1.3.6.1.4.1.5624.1.2.99.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Transmit monitoring global state. If enabled(1), all ports will monitor the transmit queues for stalled ports. If a port is detected as stalled, the configured action will take effect.
What is etsysTxqMonitorEnableState?
Turns Transmit Queue Monitor on or off for the entire switch. When enabled(1), every port is watched for stalled transmit queues and the configured logging/ignore-pause/disable-port actions take effect as thresholds are crossed. An admin troubleshooting a suspected bad NIC on a neighboring device might temporarily set this to disabled(2) to rule out the monitor itself as the cause of port flaps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.99.1.1.9 snmpwalk -v2c -c public <target> ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB::etsysTxqMonitorEnableState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.99.1.1.9.1 snmpget -v2c -c public <target> ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB::etsysTxqMonitorEnableState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.99.1.1.9.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (per-port transmit queue stall detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB::etsysTxqMonitorEnableState OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (per-port transmit queue stall detection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.99 | etsysTxqMonitorMIB | ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB |
| 1.3.6.1.4.1.5624.1.2.99.1 | etsysTxqMonitorObjects | ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB |
| 1.3.6.1.4.1.5624.1.2.99.1.1 | etsysTxqMonitor | ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB |
| 1.3.6.1.4.1.5624.1.2.99.1.1.9 | etsysTxqMonitorEnableState | ENTERASYS-TRANSMIT-QUEUE-MONITOR-MIB |