ENTERASYS-SECURE-SHELL-SERVER-MIB :: etsysSecureShellServerAdminMacs

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ENTERASYS-SECURE-SHELL-SERVER-MIB › etsysSecureShellServerAdminMacs

etsysSecureShellServerAdminMacs

Module: ENTERASYS-SECURE-SHELL-SERVER-MIB

OID (symbolic): ENTERASYS-SECURE-SHELL-SERVER-MIB::etsysSecureShellServerAdminMacs

OID (numeric): 1.3.6.1.4.1.5624.1.2.36.1.2.2

Node type: OBJECT-TYPE

Type: SshMacList

Access: read-write

Description: Specifies the MAC (Message Authentication Code) algorithms that the server should accept for use in data integrity verification. A re-initialization of the server may be required for this selection to take effect. By default managed entities SHOULD enable all of their supported MACs.

What is etsysSecureShellServerAdminMacs?

This value specifies which MAC algorithms the SSH server should accept for data integrity verification, and by default all supported MACs should be enabled; a server reinitialization may be required for a change to take effect. Admins restrict this list to disable weaker MAC algorithms for compliance or hardening purposes. Removing an older, weaker MAC algorithm from etsysSecureShellServerAdminMacs and reinitializing the server prevents SSH clients from negotiating that weaker algorithm going forward.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.36.1.2.2
snmpwalk -v2c -c public <target> ENTERASYS-SECURE-SHELL-SERVER-MIB::etsysSecureShellServerAdminMacs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.36.1.2.2.1
snmpget -v2c -c public <target> ENTERASYS-SECURE-SHELL-SERVER-MIB::etsysSecureShellServerAdminMacs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.36.1.2.2.1 s <value>

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (embedded SSH server management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-SECURE-SHELL-SERVER-MIB::etsysSecureShellServerAdminMacs OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (embedded SSH server management) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.36etsysSecureShellServerMIBENTERASYS-SECURE-SHELL-SERVER-MIB
1.3.6.1.4.1.5624.1.2.36.1etsysSecureShellServerENTERASYS-SECURE-SHELL-SERVER-MIB
1.3.6.1.4.1.5624.1.2.36.1.2etsysSecureShellServerMacENTERASYS-SECURE-SHELL-SERVER-MIB
1.3.6.1.4.1.5624.1.2.36.1.2.2etsysSecureShellServerAdminMacsENTERASYS-SECURE-SHELL-SERVER-MIB