All MIBs › ENTERASYS-RIPv2-EXT-MIB › etsysRip2ExtOperStatus
etsysRip2ExtOperStatus
Module: ENTERASYS-RIPv2-EXT-MIB
OID (symbolic): ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtOperStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.66.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current operational state of the RIP Protocol.
Changing the state of the etsysRip2ExtAdminStatus object may effect the state of this object. If etsysRip2ExtAdminStatus is set to adminStatusDown, this object's status is changed to operStatusGoingDown. Once the RIP process has finished cleaning up its routing table and freeing its resources, the status is changed to operStatusDown.
If etsysRip2ExtAdminStatus is set to adminStatusUp, this object's status is changed to operStatusGoingUp. After RIP allocates its resources and begins operation, the status of this object changes to operStatusUp.
If there are problems acquiring the resources needed to operate the RIP protocol, the status changes to operStatusActFailed.
What is etsysRip2ExtOperStatus?
This reports the current operational state of the RIP protocol, such as active, inactive, activating, deactivating, or failed to activate. Admins check this to confirm whether a change to etsysRip2ExtAdminStatus has actually taken effect, or to diagnose why RIP failed to start. If etsysRip2ExtOperStatus shows operStatusActFailed(5) after enabling RIP, the admin knows there was a resource problem preventing RIP from starting successfully.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.66.1.1.2 snmpwalk -v2c -c public <target> ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.66.1.1.2.1 snmpget -v2c -c public <target> ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtOperStatus.1
Start monitoring Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (RIP-2 protocol tuning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtOperStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (RIP-2 protocol tuning) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.66 | etsysRip2ExtMIB | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1 | etsysRip2ExtObjects | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1.1 | etsysRip2ExtGlobals | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1.1.2 | etsysRip2ExtOperStatus | ENTERASYS-RIPv2-EXT-MIB |