All MIBs › ENTERASYS-RIPv2-EXT-MIB › etsysRip2ExtMaxEcmpHops
etsysRip2ExtMaxEcmpHops
Module: ENTERASYS-RIPv2-EXT-MIB
OID (symbolic): ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtMaxEcmpHops
OID (numeric): 1.3.6.1.4.1.5624.1.2.66.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The maximum number of equal-cost next hops that RIP can program in the Routing Table Manager.
Changing this value causes RIP to refresh all of its routes in the Routing Table Manager with the new maximum number of equal-cost next hops.
What is etsysRip2ExtMaxEcmpHops?
This sets the maximum number of equal-cost next hops RIP is allowed to install in the routing table for a given destination. Admins tune this to control how much load-balancing RIP performs across multiple equal-cost paths, and changing it causes RIP to refresh all its routes with the new maximum. An admin with three equal-cost links to a destination would need etsysRip2ExtMaxEcmpHops set to at least 3 for RIP to use all three paths simultaneously.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.66.1.1.3 snmpwalk -v2c -c public <target> ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtMaxEcmpHops
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.66.1.1.3.1 snmpget -v2c -c public <target> ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtMaxEcmpHops.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.66.1.1.3.1 i <value>
Start monitoring Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (RIP-2 protocol tuning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtMaxEcmpHops OID value, configure state conditions and alerts, and monitor any Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (RIP-2 protocol tuning) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.66 | etsysRip2ExtMIB | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1 | etsysRip2ExtObjects | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1.1 | etsysRip2ExtGlobals | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1.1.3 | etsysRip2ExtMaxEcmpHops | ENTERASYS-RIPv2-EXT-MIB |