All MIBs › ENTERASYS-RIPv2-EXT-MIB › etsysRip2ExtAdminStatus
etsysRip2ExtAdminStatus
Module: ENTERASYS-RIPv2-EXT-MIB
OID (symbolic): ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtAdminStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.66.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The current administrative state of the RIP protocol.
Setting this object to adminStatusUp turns on the RIP protocol, while setting it to adminStatusDown turns off the RIP protocol. When the object is set to adminStatusUp, it triggers the RIP process to begin normal operation by populating its routing table and sending/receiving routing updates.
Setting this object to adminStatusDown turns off the RIP protocol. This causes the etsysRip2ExtOperStatus object to change its state to operStatusGoingDown. This has the effect of removing all of the RIP routes from the RIB.
What is etsysRip2ExtAdminStatus?
This controls the administrative state of the RIP routing protocol on the device, turning it on or off. Admins set this to adminStatusUp to activate RIP, which then begins populating its routing table and exchanging updates, or to adminStatusDown to shut it down and remove its routes. An admin decommissioning RIP in favor of a different routing protocol would set etsysRip2ExtAdminStatus to adminStatusDown(2), removing all RIP-learned routes from the routing table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.66.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.66.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.66.1.1.1.1 i <value>
Start monitoring Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (RIP-2 protocol tuning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-RIPv2-EXT-MIB::etsysRip2ExtAdminStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (RIP-2 protocol tuning) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.66 | etsysRip2ExtMIB | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1 | etsysRip2ExtObjects | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1.1 | etsysRip2ExtGlobals | ENTERASYS-RIPv2-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.66.1.1.1 | etsysRip2ExtAdminStatus | ENTERASYS-RIPv2-EXT-MIB |