All MIBs › ENTERASYS-LINK-FLAP-MIB › etsysLinkFlapSystemState
etsysLinkFlapSystemState
Module: ENTERASYS-LINK-FLAP-MIB
OID (symbolic): ENTERASYS-LINK-FLAP-MIB::etsysLinkFlapSystemState
OID (numeric): 1.3.6.1.4.1.5624.1.2.52.1.1.1
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The current state of the active part of the Link Flap feature.
enabled (1) - All supported aspects of Link Flap are operational.
disabled (2) - Link Flap is configurable but no actions are taken. All statistical information is still gathered and available.
When this object is set to disabled the Link Flap feature MUST release its control on all interfaces. Any interfaces which the Link Flap feature had operationally held in the 'down' state MUST be allowed to attain their currently correct operational state.
Maintaining the value of this object across agent reboots is REQUIRED.
What is etsysLinkFlapSystemState?
This read-write status controls whether the Link Flap detection feature is actively enforcing its configured actions across the device, or merely gathering statistics without acting. Admins toggle it globally to turn link-flap protection on or off; disabling it immediately releases any interfaces the feature had forced into the down state, while enabled(1) lets it start disabling flapping ports, logging, or sending traps again. For example, setting this to disabled(2) during a planned cabling change prevents Link Flap from shutting down ports that are expected to bounce repeatedly while techs work.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.52.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-LINK-FLAP-MIB::etsysLinkFlapSystemState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.52.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-LINK-FLAP-MIB::etsysLinkFlapSystemState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.52.1.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Link Flap Detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-LINK-FLAP-MIB::etsysLinkFlapSystemState OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Link Flap Detection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.52 | etsysLinkFlapMIB | ENTERASYS-LINK-FLAP-MIB |
| 1.3.6.1.4.1.5624.1.2.52.1 | etsysLinkFlapObjects | ENTERASYS-LINK-FLAP-MIB |
| 1.3.6.1.4.1.5624.1.2.52.1.1 | etsysLinkFlapSystemBranch | ENTERASYS-LINK-FLAP-MIB |
| 1.3.6.1.4.1.5624.1.2.52.1.1.1 | etsysLinkFlapSystemState | ENTERASYS-LINK-FLAP-MIB |