All MIBs › ENTERASYS-FLOW-LIMITING-MIB › etsysFlowLimitingSystemState
etsysFlowLimitingSystemState
Module: ENTERASYS-FLOW-LIMITING-MIB
OID (symbolic): ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemState
OID (numeric): 1.3.6.1.4.1.5624.1.2.43.1.1.1
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The current state of the active part of the Flow Limiting feature.
enabled (1) - All aspects of Flow Limiting are operational.
disabled (2) - Flow Limiting is configurable but no actions are taken, no notifications are generated and no interfaces will be disabled. All statistical information is still gathered and available.
When this object is set to disabled the Flow Limiting feature MUST release its control on all interfaces. Any interfaces that had been operationally held in the 'down' state MUST be allowed to attain their currently correct operational state.
Any flows created by the Flow Limiting feature MUST be removed.
Maintaining the value of this object across agent reboots is REQUIRED.
What is etsysFlowLimitingSystemState?
Turns the Flow Limiting feature on or off device-wide: enabled(1) makes it fully operational, while disabled(2) leaves it configurable and still gathering statistics but takes no enforcement action and generates no notifications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.43.1.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemState OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.43 | etsysFlowLimitingMIB | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1 | etsysFlowLimitingObjects | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.1 | etsysFlowLimitingSystemBranch | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.1.1 | etsysFlowLimitingSystemState | ENTERASYS-FLOW-LIMITING-MIB |