All MIBs › ENTERASYS-FLOW-LIMITING-MIB › etsysFlowLimitingSystemSnmpNotifications
etsysFlowLimitingSystemSnmpNotifications
Module: ENTERASYS-FLOW-LIMITING-MIB
OID (symbolic): ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemSnmpNotifications
OID (numeric): 1.3.6.1.4.1.5624.1.2.43.1.1.2
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The current state of the SNMP Notification functionality in the Flow Limiting feature.
enabled (1) - Flow Limiting will generate SNMP Notifications for flow counts and setup rates that exceed the configured limits. The Flow Limiting feature MUST be enabled for SNMP Notifications to be generated.
disabled (2) - Flow Limiting will not generate SNMP Notifications under any conditions.
A notification is generated when a value is first detected above its respective configured limit. That notification MUST NOT be generated again until the respective value has transitioned through its respective limit in both directions.
Agents are not required to generate SNMP Notifications for conditions that exist when this object is set to enabled. SNMP Notifications MAY only be generated after additional flow setups are detected that exceed the configured limits on that interface.
Maintaining the value of this object across agent reboots is REQUIRED.
What is etsysFlowLimitingSystemSnmpNotifications?
Controls whether Flow Limiting generates SNMP notifications when flow counts or setup rates exceed configured limits; notifications only fire while the overall feature (etsysFlowLimitingSystemState) is also enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.1.2 snmpwalk -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemSnmpNotifications
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.1.2.1 snmpget -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemSnmpNotifications.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.43.1.1.2.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemSnmpNotifications OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.43 | etsysFlowLimitingMIB | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1 | etsysFlowLimitingObjects | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.1 | etsysFlowLimitingSystemBranch | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.1.2 | etsysFlowLimitingSystemSnmpNotifications | ENTERASYS-FLOW-LIMITING-MIB |