All MIBs › ENTERASYS-FLOW-LIMITING-MIB › etsysFlowLimitingSystemInterfaceShutdown
etsysFlowLimitingSystemInterfaceShutdown
Module: ENTERASYS-FLOW-LIMITING-MIB
OID (symbolic): ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemInterfaceShutdown
OID (numeric): 1.3.6.1.4.1.5624.1.2.43.1.1.3
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The current state of the interface shutdown functionality in the Flow Limiting feature.
enabled (1) - Flow Limiting will shutdown an interface when the conditions on that interface exceed the configured values, one of the specified actions is to disable the interface, and the Flow Limiting feature is enabled.
disabled (2) - Flow Limiting will not shutdown any interface under any conditions.
When this object is set to disabled the Flow Limiting feature MUST release its control on all interfaces. Any interfaces that had been operationally held in the 'down' state MUST be allowed to attain their currently correct operational state.
Agents are not required to shutdown interfaces for conditions that exist when this object is set to enabled. Interfaces MAY only be shutdown after additional flow setups are detected that exceed the configured limits on that interface.
Maintaining the value of this object across agent reboots is REQUIRED.
What is etsysFlowLimitingSystemInterfaceShutdown?
Controls whether Flow Limiting is allowed to administratively shut down an interface when its configured flow limits are exceeded and a shutdown action is specified; when disabled, no interface will ever be shut down by this feature.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.1.3 snmpwalk -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemInterfaceShutdown
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.1.3.1 snmpget -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemInterfaceShutdown.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.43.1.1.3.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingSystemInterfaceShutdown OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.43 | etsysFlowLimitingMIB | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1 | etsysFlowLimitingObjects | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.1 | etsysFlowLimitingSystemBranch | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.1.3 | etsysFlowLimitingSystemInterfaceShutdown | ENTERASYS-FLOW-LIMITING-MIB |