All MIBs › ENTERASYS-FLOW-LIMITING-MIB › etsysFlowLimitingIntfStatus
etsysFlowLimitingIntfStatus
Module: ENTERASYS-FLOW-LIMITING-MIB
OID (symbolic): ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfStatus
OID (numeric): 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The current status of the interface with respect to Flow Limiting.
A read of operational(1) indicates that the Flow Limiting feature has not taken any action to operationally limit this interface.
A read of disabled(2) indicates that the Flow Limiting feature has taken action to operationally disable this interface due to ...
A read of droppingExcessFlows(3) indicates that this interface ...
A read of creatingDiscardFlows(4) indicates that this interface ...
Setting this object to operational(1) when it is disabled(2) will cause Flow Limiting to release it's control that is keeping this interface operationally disabled. Any other write of this object will have no effect.
Maintaining the value of this object across agent reboots is NOT RECOMMENDED.
What is etsysFlowLimitingIntfStatus?
Reports the current Flow Limiting status of the interface: operational(1) means no restriction is applied, disabled(2) means the interface was shut down by the feature, and droppingExcessFlows(3) or creatingDiscardFlows(4) indicate active mitigation; writing operational(1) releases a disabled interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.3 snmpwalk -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.3.1 snmpget -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.3.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.43 | etsysFlowLimitingMIB | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1 | etsysFlowLimitingObjects | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3 | etsysFlowLimitingInterfaceBranch | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3.1 | etsysFlowLimitingInterfaceTable | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3.1.1 | etsysFlowLimitingInterfaceEntry | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.3 | etsysFlowLimitingIntfStatus | ENTERASYS-FLOW-LIMITING-MIB |