All MIBs › ENTERASYS-FLOW-LIMITING-MIB › etsysFlowLimitingIntfClassType
etsysFlowLimitingIntfClassType
Module: ENTERASYS-FLOW-LIMITING-MIB
OID (symbolic): ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfClassType
OID (numeric): 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1
Node type: OBJECT-TYPE
Type: FlowLmtIntfClass
Access: read-write
Description: The Flow Limiting interface class associated with this interface. The class defines the flow limits and actions to be taken when those limits are exceeded.
When the value of this object changes and flow limiting is currently enabled, both globally and on this interface, the agent MUST perform the following steps prior to enforcing the new limits:
1) If the interface had been operationally held in the 'down' state due to prior flow conditions it MUST be allowed to attain its currently correct operational state.
2) Any flows created by the Flow Limiting feature for this interface must be removed.
3) The respective etsysFlowLimitingIntfFlowCountEvents and etsysFlowLimitingIntfSetupRateEvents objects MUST be set to zero.
4) etsysFlowLimitingIntfStatus and etsysFlowLimitingIntfReason MUST be set to operational(1) and noAction(1) respectively.
Maintaining the value of this object across agent reboots is REQUIRED.
What is etsysFlowLimitingIntfClassType?
Assigns this interface to a Flow Limiting class, which determines the flow-count and setup-rate limits and actions that apply; changing it while limiting is active clears prior flows and resets the interface's status.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfClassType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfClassType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-FLOW-LIMITING-MIB::etsysFlowLimitingIntfClassType OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Flow Limiting security feature) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.43 | etsysFlowLimitingMIB | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1 | etsysFlowLimitingObjects | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3 | etsysFlowLimitingInterfaceBranch | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3.1 | etsysFlowLimitingInterfaceTable | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3.1.1 | etsysFlowLimitingInterfaceEntry | ENTERASYS-FLOW-LIMITING-MIB |
| 1.3.6.1.4.1.5624.1.2.43.1.3.1.1.1 | etsysFlowLimitingIntfClassType | ENTERASYS-FLOW-LIMITING-MIB |