All MIBs › ENTERASYS-ETH-OAM-EXT-MIB › etsysEthOamExtUldPortActiveOamMode
etsysEthOamExtUldPortActiveOamMode
Module: ENTERASYS-ETH-OAM-EXT-MIB
OID (symbolic): ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveOamMode
OID (numeric): 1.3.6.1.4.1.5624.1.2.78.1.3.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The active OAM mode for the port. When a port is configured in the passive OAM mode and ULD is enabled in the standard or fast ULD mode, the passive mode is superceeded by this value. The port will operate as though it is configured in the active OAM mode. If the port is configured in the passive mode and ULD is disabled, the value is passive(1) and OAM will operate in the passive mode. Otherwise, the value is active(2) and OAM will operate in the active mode. This enforces the requirement for ULD that both peers must operate as active OAM clients.
What is etsysEthOamExtUldPortActiveOamMode?
The OAM mode this port is actually operating in: active(2) or passive(1). If the port is configured passive but ULD (standard or fast) is enabled, the switch forces active mode here since both OAM peers must be active for ULD to work; only when ULD is disabled does a passive-configured port actually stay passive(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.78.1.3.2.1.13 snmpwalk -v2c -c public <target> ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveOamMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.78.1.3.2.1.13.1 snmpget -v2c -c public <target> ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveOamMode.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> etsysEthOamExtUldPortActiveOamMode.1
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (802.3ah Ethernet OAM extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveOamMode OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (802.3ah Ethernet OAM extensions) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.78 | etsysEthOamExtMIB | ENTERASYS-ETH-OAM-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.78.1 | etsysEthOamExtObjects | ENTERASYS-ETH-OAM-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.78.1.3 | etsysEthOamExtUld | ENTERASYS-ETH-OAM-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.78.1.3.2 | etsysEthOamExtUldPortTable | ENTERASYS-ETH-OAM-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.78.1.3.2.1 | etsysEthOamExtUldPortEntry | ENTERASYS-ETH-OAM-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.78.1.3.2.1.13 | etsysEthOamExtUldPortActiveOamMode | ENTERASYS-ETH-OAM-EXT-MIB |