ENTERASYS-ETH-OAM-EXT-MIB :: etsysEthOamExtUldPortActiveFastStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ENTERASYS-ETH-OAM-EXT-MIB › etsysEthOamExtUldPortActiveFastStatus

etsysEthOamExtUldPortActiveFastStatus

Module: ENTERASYS-ETH-OAM-EXT-MIB

OID (symbolic): ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveFastStatus

OID (numeric): 1.3.6.1.4.1.5624.1.2.78.1.3.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The active status of Fast ULD on the port. The active status of Fast ULD depends on the configured ULD mode, the state of the OAM Discovery state machine, and the state of the Fast ULD state machine. Fast ULD is notActive(1) if ULD is not configured in the Fast mode. If ULD is configured in Fast mode and ULD is active, the active status will reflect the state of the Fast ULD state machine. In the SEND_SLOW state the active status is activeSlow(2), in the SEND_FAST state the active status is activeFast(3), in the FAULT state the active status is faultDetected(4). In the RESET state, the status is notActive(1).

What is etsysEthOamExtUldPortActiveFastStatus?

The live state of Fast ULD on this port: notActive(1) if Fast mode isn't configured or is resetting, activeSlow(2) while negotiating, activeFast(3) once running at the fast interval, or faultDetected(4) when a unidirectional link has actually been found.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.78.1.3.2.1.6
snmpwalk -v2c -c public <target> ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveFastStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.78.1.3.2.1.6.1
snmpget -v2c -c public <target> ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveFastStatus.1

Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (802.3ah Ethernet OAM extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-ETH-OAM-EXT-MIB::etsysEthOamExtUldPortActiveFastStatus OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (802.3ah Ethernet OAM extensions) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5624enterasysENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1etsysMibsENTERASYS-MIB-NAMES
1.3.6.1.4.1.5624.1.2etsysModulesENTERASYS-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.5624.1.2.78etsysEthOamExtMIBENTERASYS-ETH-OAM-EXT-MIB
1.3.6.1.4.1.5624.1.2.78.1etsysEthOamExtObjectsENTERASYS-ETH-OAM-EXT-MIB
1.3.6.1.4.1.5624.1.2.78.1.3etsysEthOamExtUldENTERASYS-ETH-OAM-EXT-MIB
1.3.6.1.4.1.5624.1.2.78.1.3.2etsysEthOamExtUldPortTableENTERASYS-ETH-OAM-EXT-MIB
1.3.6.1.4.1.5624.1.2.78.1.3.2.1etsysEthOamExtUldPortEntryENTERASYS-ETH-OAM-EXT-MIB
1.3.6.1.4.1.5624.1.2.78.1.3.2.1.6etsysEthOamExtUldPortActiveFastStatusENTERASYS-ETH-OAM-EXT-MIB