All MIBs › ENTERASYS-ENCR-8021X-CONFIG-MIB › etsysEncrDot1xAuthServerTimeout
etsysEncrDot1xAuthServerTimeout
Module: ENTERASYS-ENCR-8021X-CONFIG-MIB
OID (symbolic): ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthServerTimeout
OID (numeric): 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: An encrypted octet string containing
The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.
Alternately, the default value (for ports that use station-based access control, and that therefore may support many virtual PAEs).
The data type is 1, Integer32.
What is etsysEncrDot1xAuthServerTimeout?
This object holds, in encrypted form, the serverTimeout value in seconds used by the 802.1x Backend Authentication state machine per IEEE 802.1x Section 9.6.4.1. Admins tune this to set how long the switch waits for a response from the RADIUS authentication server before treating the request as failed. For example, an encrypted value decoding to 30 fails over after 30 seconds of no reply from the authentication server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.6 snmpwalk -v2c -c public <target> ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthServerTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.6.1 snmpget -v2c -c public <target> ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthServerTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.6.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (encrypted 802.1X config, SNMPv1-only platforms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthServerTimeout OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (encrypted 802.1X config, SNMPv1-only platforms) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.19 | etsysEncr8021xConfigMIB | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1 | etsysEncrDot1xConfigObjects | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1 | etsysEncrDot1xAuthConfigBranch | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1.1 | etsysEncrDot1xAuthPortConfigTable | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1.1.1 | etsysEncrDot1xAuthPortConfigEntry | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.6 | etsysEncrDot1xAuthServerTimeout | ENTERASYS-ENCR-8021X-CONFIG-MIB |