All MIBs › ENTERASYS-ENCR-8021X-CONFIG-MIB › etsysEncrDot1xAuthMaxReq
etsysEncrDot1xAuthMaxReq
Module: ENTERASYS-ENCR-8021X-CONFIG-MIB
OID (symbolic): ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthMaxReq
OID (numeric): 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: An encrypted octet string containing
The value of the maxReq constant currently in use by the Backend Authentication state machine.
Alternately, the default value (for ports that use station-based access control, and that therefore may support many virtual PAEs).
The data type is 1, Integer32.
What is etsysEncrDot1xAuthMaxReq?
This object holds, in encrypted form, the maxReq value used by the 802.1x Backend Authentication state machine per IEEE 802.1x Section 9.6.4.1, the maximum number of retransmissions to the supplicant. Admins tune this to control how many times the switch retries an authentication request before declaring failure. For example, an encrypted value decoding to 2 allows two retries before the supplicant is marked unauthenticated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.7 snmpwalk -v2c -c public <target> ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthMaxReq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.7.1 snmpget -v2c -c public <target> ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthMaxReq.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.7.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (encrypted 802.1X config, SNMPv1-only platforms) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-ENCR-8021X-CONFIG-MIB::etsysEncrDot1xAuthMaxReq OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (encrypted 802.1X config, SNMPv1-only platforms) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.19 | etsysEncr8021xConfigMIB | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1 | etsysEncrDot1xConfigObjects | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1 | etsysEncrDot1xAuthConfigBranch | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1.1 | etsysEncrDot1xAuthPortConfigTable | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1.1.1 | etsysEncrDot1xAuthPortConfigEntry | ENTERASYS-ENCR-8021X-CONFIG-MIB |
| 1.3.6.1.4.1.5624.1.2.19.1.1.1.1.7 | etsysEncrDot1xAuthMaxReq | ENTERASYS-ENCR-8021X-CONFIG-MIB |