All MIBs › ENTERASYS-CONFIGURATION-MANAGEMENT-MIB › etsysConfigMgmtChangeBytesTransferred
etsysConfigMgmtChangeBytesTransferred
Module: ENTERASYS-CONFIGURATION-MANAGEMENT-MIB
OID (symbolic): ENTERASYS-CONFIGURATION-MANAGEMENT-MIB::etsysConfigMgmtChangeBytesTransferred
OID (numeric): 1.3.6.1.4.1.5624.1.2.16.2.7.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The number of bytes currently transferred. A value of -1 indicates that this feature is not supported for the protocol currently selected. This value is reset to its initial state when the etsysConfigMgmtRowStatus object is set to the active state.
What is etsysConfigMgmtChangeBytesTransferred?
This read-only Integer32 reports the number of bytes transferred so far for this configuration change request, resetting to its initial value whenever the row's RowStatus is set active, with -1 indicating the currently selected protocol doesn't support byte-count reporting. Admins watch this counter climb during a large image download to confirm the transfer is progressing rather than stalled. For example, a bytesTransferred value stuck at the same number across repeated polls would suggest the TFTP or SCP transfer has hung.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.16.2.7.1.8 snmpwalk -v2c -c public <target> ENTERASYS-CONFIGURATION-MANAGEMENT-MIB::etsysConfigMgmtChangeBytesTransferred
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.16.2.7.1.8.1 snmpget -v2c -c public <target> ENTERASYS-CONFIGURATION-MANAGEMENT-MIB::etsysConfigMgmtChangeBytesTransferred.1
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware/config file management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-CONFIGURATION-MANAGEMENT-MIB::etsysConfigMgmtChangeBytesTransferred OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks)/router (firmware/config file management) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.16 | etsysConfigurationManagementMIB | ENTERASYS-CONFIGURATION-MANAGEMENT-MIB |
| 1.3.6.1.4.1.5624.1.2.16.2 | etsysConfigMgmtChange | ENTERASYS-CONFIGURATION-MANAGEMENT-MIB |
| 1.3.6.1.4.1.5624.1.2.16.2.7 | etsysConfigMgmtChangeTable | ENTERASYS-CONFIGURATION-MANAGEMENT-MIB |
| 1.3.6.1.4.1.5624.1.2.16.2.7.1 | etsysConfigMgmtChangeEntry | ENTERASYS-CONFIGURATION-MANAGEMENT-MIB |
| 1.3.6.1.4.1.5624.1.2.16.2.7.1.8 | etsysConfigMgmtChangeBytesTransferred | ENTERASYS-CONFIGURATION-MANAGEMENT-MIB |