All MIBs › ENTERASYS-AUTO-TRACKING-MIB › etsysAutoTrackingPortRadiusRejectProfileIndex
etsysAutoTrackingPortRadiusRejectProfileIndex
Module: ENTERASYS-AUTO-TRACKING-MIB
OID (symbolic): ENTERASYS-AUTO-TRACKING-MIB::etsysAutoTrackingPortRadiusRejectProfileIndex
OID (numeric): 1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The policy profile index to be used by the auto-tracking provisioning agent if a complete RADIUS server timeout occurs.
This policy profile index will only be used if the auto-tracking provisioning agent is the highest precedent multiauth provisioning agent to provision the session. Auto-tracking has the lowest precedence by default.
The value will not be overwritten by the policy profile index in etsysAutoTrackingPortRadiusTimeoutProfileIndex if both a rejection and a complete timeout occur.
A value of (0) indicates that no policy profile index is configured for complete RADIUS server timeouts.
What is etsysAutoTrackingPortRadiusRejectProfileIndex?
This read-write value sets the policy profile index the auto-tracking provisioning agent applies to a session when RADIUS authentication is rejected, provided auto-tracking is the highest-precedence provisioning agent for that session. An administrator configures this restrictive fallback profile so a rejected device still gets some defined, limited network access instead of none at all, and per the MIB this reject-based profile takes priority over etsysAutoTrackingPortRadiusTimeoutProfileIndex if both a reject and a complete timeout occur. For example, setting etsysAutoTrackingPortRadiusRejectProfileIndex to 2 would apply policy profile 2, perhaps a guest-only profile, to any device whose RADIUS authentication attempt is explicitly rejected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.7 snmpwalk -v2c -c public <target> ENTERASYS-AUTO-TRACKING-MIB::etsysAutoTrackingPortRadiusRejectProfileIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.7.1 snmpget -v2c -c public <target> ENTERASYS-AUTO-TRACKING-MIB::etsysAutoTrackingPortRadiusRejectProfileIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.7.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (RADIUS-based Auto Tracking NAC) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-AUTO-TRACKING-MIB::etsysAutoTrackingPortRadiusRejectProfileIndex OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (RADIUS-based Auto Tracking NAC) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.92 | etsysAutoTrackingMIB | ENTERASYS-AUTO-TRACKING-MIB |
| 1.3.6.1.4.1.5624.1.2.92.2 | etsysAutoTrackingBody | ENTERASYS-AUTO-TRACKING-MIB |
| 1.3.6.1.4.1.5624.1.2.92.2.1 | etsysAutoTrackingObjects | ENTERASYS-AUTO-TRACKING-MIB |
| 1.3.6.1.4.1.5624.1.2.92.2.1.2 | etsysAutoTrackingPort | ENTERASYS-AUTO-TRACKING-MIB |
| 1.3.6.1.4.1.5624.1.2.92.2.1.2.1 | etsysAutoTrackingPortTable | ENTERASYS-AUTO-TRACKING-MIB |
| 1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1 | etsysAutoTrackingPortEntry | ENTERASYS-AUTO-TRACKING-MIB |
| 1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.7 | etsysAutoTrackingPortRadiusRejectProfileIndex | ENTERASYS-AUTO-TRACKING-MIB |