All MIBs › ELTEK-GENERIC-MIB › loadLVD2EnableStatus
loadLVD2EnableStatus
Module: ELTEK-GENERIC-MIB
OID (symbolic): ELTEK-GENERIC-MIB::loadLVD2EnableStatus
OID (numeric): 1.3.6.1.4.1.12148.7.4.3.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of contactors configuration. 'enabled' means that the contactor is i n use. 'disabled' means that the contactor is disconfigured and not in use.
What is loadLVD2EnableStatus?
Indicates whether the B Bus (secondary loads) LVD contactor is configured for use on this system: enabled(1) means active, disabled(0) means not wired or used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.7.4.3.5 snmpwalk -v2c -c public <target> ELTEK-GENERIC-MIB::loadLVD2EnableStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.7.4.3.5.1 snmpget -v2c -c public <target> ELTEK-GENERIC-MIB::loadLVD2EnableStatus.1
Start monitoring Eltek DC power-system control unit (site identity/trap config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-GENERIC-MIB::loadLVD2EnableStatus OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (site identity/trap config) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.7 | eltekPlant | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.4 | loadDistribution | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.4.3 | loadDistributionLVDStatus | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.4.3.5 | loadLVD2EnableStatus | ELTEK-GENERIC-MIB |