All MIBs › ELTEK-GENERIC-MIB › loadLVD2ConnectVoltage
loadLVD2ConnectVoltage
Module: ELTEK-GENERIC-MIB
OID (symbolic): ELTEK-GENERIC-MIB::loadLVD2ConnectVoltage
OID (numeric): 1.3.6.1.4.1.12148.7.4.3.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The B Bus (secondary loads) Contactor Connect Voltage
What is loadLVD2ConnectVoltage?
The battery voltage, in hundredths of a volt, at which the B Bus (secondary loads) contactor is allowed to reconnect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.7.4.3.7 snmpwalk -v2c -c public <target> ELTEK-GENERIC-MIB::loadLVD2ConnectVoltage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.7.4.3.7.1 snmpget -v2c -c public <target> ELTEK-GENERIC-MIB::loadLVD2ConnectVoltage.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.12148.7.4.3.7.1 i <value>
Start monitoring Eltek DC power-system control unit (site identity/trap config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-GENERIC-MIB::loadLVD2ConnectVoltage OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (site identity/trap config) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.7 | eltekPlant | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.4 | loadDistribution | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.4.3 | loadDistributionLVDStatus | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.4.3.7 | loadLVD2ConnectVoltage | ELTEK-GENERIC-MIB |