All MIBs › ELTEK-GENERIC-MIB › loadLVD1EnableStatus

loadLVD1EnableStatus

OID (symbolic): ELTEK-GENERIC-MIB::loadLVD1EnableStatus

OID (numeric): 1.3.6.1.4.1.12148.7.4.3.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The status of contactors configuration. 'enabled' means that the contactor is i n use. 'disabled' means that the contactor is disconfigured and not in use.

What is loadLVD1EnableStatus?

Indicates whether the A Bus (primary loads) low-voltage disconnect contactor is configured for use on this system: enabled(1) means it is wired in and active, disabled(0) means it is not configured and should be ignored.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.7.4.3.1
snmpwalk -v2c -c public <target> ELTEK-GENERIC-MIB::loadLVD1EnableStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.7.4.3.1.1
snmpget -v2c -c public <target> ELTEK-GENERIC-MIB::loadLVD1EnableStatus.1

Start monitoring Eltek DC power-system control unit (site identity/trap config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-GENERIC-MIB::loadLVD1EnableStatus OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (site identity/trap config) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.12148	eltek	ELTEK-COMMON-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.12148.7	eltekPlant	ELTEK-GENERIC-MIB
1.3.6.1.4.1.12148.7.4	loadDistribution	ELTEK-GENERIC-MIB
1.3.6.1.4.1.12148.7.4.3	loadDistributionLVDStatus	ELTEK-GENERIC-MIB
1.3.6.1.4.1.12148.7.4.3.1	loadLVD1EnableStatus	ELTEK-GENERIC-MIB

ELTEK-GENERIC-MIB :: loadLVD1EnableStatus

loadLVD1EnableStatus

Module

This MIB depends on