All MIBs › ELTEK-GENERIC-MIB › batteryEqualizeVoltConfig
batteryEqualizeVoltConfig
Module: ELTEK-GENERIC-MIB
OID (symbolic): ELTEK-GENERIC-MIB::batteryEqualizeVoltConfig
OID (numeric): 1.3.6.1.4.1.12148.7.3.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The Voltage at which the DC System boost charges the batteries.
What is batteryEqualizeVoltConfig?
The elevated voltage setpoint, in hundredths of a volt, used during equalize/boost charging to fully charge or balance the battery cells before the system returns to the normal float voltage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.7.3.10 snmpwalk -v2c -c public <target> ELTEK-GENERIC-MIB::batteryEqualizeVoltConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.7.3.10.1 snmpget -v2c -c public <target> ELTEK-GENERIC-MIB::batteryEqualizeVoltConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.12148.7.3.10.1 i <value>
Start monitoring Eltek DC power-system control unit (site identity/trap config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-GENERIC-MIB::batteryEqualizeVoltConfig OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (site identity/trap config) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.7 | eltekPlant | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.3 | battery | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.3.10 | batteryEqualizeVoltConfig | ELTEK-GENERIC-MIB |