All MIBs › ELTEK-GENERIC-MIB › batteryChargeCurrentLimitValue
batteryChargeCurrentLimitValue
Module: ELTEK-GENERIC-MIB
OID (symbolic): ELTEK-GENERIC-MIB::batteryChargeCurrentLimitValue
OID (numeric): 1.3.6.1.4.1.12148.7.3.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Battery charging current limit value
What is batteryChargeCurrentLimitValue?
Sets the maximum battery charging current in amperes (0-2100A) when charge-current limiting is active, letting an admin protect an older or smaller battery bank from being charged too aggressively by high-capacity rectifiers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.7.3.7 snmpwalk -v2c -c public <target> ELTEK-GENERIC-MIB::batteryChargeCurrentLimitValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.7.3.7.1 snmpget -v2c -c public <target> ELTEK-GENERIC-MIB::batteryChargeCurrentLimitValue.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.12148.7.3.7.1 i <value>
Start monitoring Eltek DC power-system control unit (site identity/trap config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-GENERIC-MIB::batteryChargeCurrentLimitValue OID value, configure state conditions and alerts, and monitor any Eltek DC power-system control unit (site identity/trap config) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.12148 | eltek | ELTEK-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.12148.7 | eltekPlant | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.3 | battery | ELTEK-GENERIC-MIB |
| 1.3.6.1.4.1.12148.7.3.7 | batteryChargeCurrentLimitValue | ELTEK-GENERIC-MIB |