ELTEK-DISTRIBUTED-PLANT-MIB :: loadLVD2EnableStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ELTEK-DISTRIBUTED-PLANT-MIB › loadLVD2EnableStatus

loadLVD2EnableStatus

Module: ELTEK-DISTRIBUTED-PLANT-MIB

OID (symbolic): ELTEK-DISTRIBUTED-PLANT-MIB::loadLVD2EnableStatus

OID (numeric): 1.3.6.1.4.1.12148.8.4.3.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The status of contactors configuration. 'enabled' means that the contactor is i n use. 'disabled' means that the contactor is disconfigured and not in use.

What is loadLVD2EnableStatus?

Reports whether the secondary (LVD2, 'B Bus') load-disconnect contactor is configured into service: enabled(1) actively protecting that load bus, disabled(0) taken out of the configuration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.8.4.3.5
snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTED-PLANT-MIB::loadLVD2EnableStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.8.4.3.5.1
snmpget -v2c -c public <target> ELTEK-DISTRIBUTED-PLANT-MIB::loadLVD2EnableStatus.1

Start monitoring Eltek distributed DC power plant/rectifier system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTED-PLANT-MIB::loadLVD2EnableStatus OID value, configure state conditions and alerts, and monitor any Eltek distributed DC power plant/rectifier system from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12148eltekELTEK-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12148.8eltekDistributedPlantELTEK-DISTRIBUTED-PLANT-MIB
1.3.6.1.4.1.12148.8.4loadDistributionELTEK-DISTRIBUTED-PLANT-MIB
1.3.6.1.4.1.12148.8.4.3loadDistributionLVDStatusELTEK-DISTRIBUTED-PLANT-MIB
1.3.6.1.4.1.12148.8.4.3.5loadLVD2EnableStatusELTEK-DISTRIBUTED-PLANT-MIB