ELTEK-DISTRIBUTED-PLANT-MIB :: alarmLVD1open

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ELTEK-DISTRIBUTED-PLANT-MIB › alarmLVD1open

alarmLVD1open

Module: ELTEK-DISTRIBUTED-PLANT-MIB

OID (symbolic): ELTEK-DISTRIBUTED-PLANT-MIB::alarmLVD1open

OID (numeric): 1.3.6.1.4.1.12148.8.7.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The A Bus (primary loads) Contactor alarm. The contactor dropout voltage has been reached and the contactor will release.

What is alarmLVD1open?

Alarm flag (normal(0)/alarm(1)) that fires when the primary loads' ('A Bus') LVD contactor has reached its dropout voltage and released, disconnecting that load bus - correlates with loadLVD1Status showing disconnect(1).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12148.8.7.1.8
snmpwalk -v2c -c public <target> ELTEK-DISTRIBUTED-PLANT-MIB::alarmLVD1open

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12148.8.7.1.8.1
snmpget -v2c -c public <target> ELTEK-DISTRIBUTED-PLANT-MIB::alarmLVD1open.1

Start monitoring Eltek distributed DC power plant/rectifier system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEK-DISTRIBUTED-PLANT-MIB::alarmLVD1open OID value, configure state conditions and alerts, and monitor any Eltek distributed DC power plant/rectifier system from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.12148eltekELTEK-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12148.8eltekDistributedPlantELTEK-DISTRIBUTED-PLANT-MIB
1.3.6.1.4.1.12148.8.7alarmGroupELTEK-DISTRIBUTED-PLANT-MIB
1.3.6.1.4.1.12148.8.7.1alarmWellknownAlarmsELTEK-DISTRIBUTED-PLANT-MIB
1.3.6.1.4.1.12148.8.7.1.8alarmLVD1openELTEK-DISTRIBUTED-PLANT-MIB