ELH100-MIB :: elh100TrapMgtRowCreation

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsELH100-MIBelh100TrapMgtRowCreation

elh100TrapMgtRowCreation

Module: ELH100-MIB

OID (symbolic): ELH100-MIB::elh100TrapMgtRowCreation

OID (numeric): 1.3.6.1.4.1.52.259.10.3.1.3.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The status of this row entry. Before add a row into table, it should be created first. Set valid(1) to a row will create this row. To delete a row from this table, set this object for the row to invalid(2). Row sets for new rows with a row status set to invalid(2) return a BAD VALUE error. This object will always read as valid(1).

If no more rows can be added to the end of the table, then a row set to create a new row will return BAD VALUE.

When rows are deleted from this table, the indexes of the other rows do not change. In other words, this table can be 'sparse' or have 'holes'. Deleted entries can be re-created using a row set with a row status of valid(1).

What is elh100TrapMgtRowCreation?

Uses the same create/delete row-status pattern as elh100CommunityRowCreation but applied to the trap-destination table: set to valid(1) to add a new trap receiver entry and invalid(2) to remove one, with existing rows always reading back as valid(1).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.259.10.3.1.3.2.1.2
snmpwalk -v2c -c public <target> ELH100-MIB::elh100TrapMgtRowCreation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.259.10.3.1.3.2.1.2.1
snmpget -v2c -c public <target> ELH100-MIB::elh100TrapMgtRowCreation.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.259.10.3.1.3.2.1.2.1 i <value>

Start monitoring Cabletron ELH100 Ethernet hub/repeater with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELH100-MIB::elh100TrapMgtRowCreation OID value, configure state conditions and alerts, and monitor any Cabletron ELH100 Ethernet hub/repeater from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.259cabletronOEMELH100-MIB
1.3.6.1.4.1.52.259.10cabletronRepeatersELH100-MIB
1.3.6.1.4.1.52.259.10.3cabletronELH100ELH100-MIB
1.3.6.1.4.1.52.259.10.3.1cabletronELH100CommonELH100-MIB
1.3.6.1.4.1.52.259.10.3.1.3elh100TrapManagerMgtELH100-MIB
1.3.6.1.4.1.52.259.10.3.1.3.2elh100TrapManagerTableELH100-MIB
1.3.6.1.4.1.52.259.10.3.1.3.2.1elh100TrapMgtEntryELH100-MIB
1.3.6.1.4.1.52.259.10.3.1.3.2.1.2elh100TrapMgtRowCreationELH100-MIB