EIA-OPT-MIB :: cdx6500StatEIAEntryDimType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EIA-OPT-MIB › cdx6500StatEIAEntryDimType

cdx6500StatEIAEntryDimType

Module: EIA-OPT-MIB

OID (symbolic): EIA-OPT-MIB::cdx6500StatEIAEntryDimType

OID (numeric): 1.3.6.1.4.1.449.2.1.3.2.7.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The DIM Type for the port. dimTypeNone : DIM type is none. dimTypeNotInstalled : DIM type is not installed. dimTypeEia232d : DIM type is EIA-232-D. dimTypeX21 : DIM type is X-21. dimTypeV35 : DIM type is V.35. dimTypeV36 : DIM type is V.36. dimTypeV11 : DIM type is V.11. dimTypeEia530 : DIM type is EIA-530. dimTypeDsu : DIM type is DSU. dimTypeI430 : DIM type is I 430. newvalDimTypeNone : same as 'dimTypeNone', new enumeration added for RFC1155 compatibility.

What is cdx6500StatEIAEntryDimType?

This value reports which type of Distance Interface Module (DIM) is installed in this EIA port, such as EIA-232-D, X.21, V.35, V.36, V.11, EIA-530, DSU, or I.430, or that none is installed. An admin reads it to confirm the correct physical serial interface module is fitted before chasing cabling or clocking problems on that port. For instance, a reading of dimTypeV35 confirms a V.35 module is seated, while dimTypeNotInstalled flags an empty slot.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.2.7.1.2
snmpwalk -v2c -c public <target> EIA-OPT-MIB::cdx6500StatEIAEntryDimType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.2.7.1.2.1
snmpget -v2c -c public <target> EIA-OPT-MIB::cdx6500StatEIAEntryDimType.1

Start monitoring networking and telecom equipment with optical interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EIA-OPT-MIB::cdx6500StatEIAEntryDimType OID value, configure state conditions and alerts, and monitor any networking and telecom equipment with optical interfaces from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.3cdx6500StatisticsALC-OPT-MIB
1.3.6.1.4.1.449.2.1.3.2cdx6500StatOtherStatsGroupCDX-6500-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.3.2.7cdx6500StatEIATableEIA-OPT-MIB
1.3.6.1.4.1.449.2.1.3.2.7.1cdx6500StatEIAEntryEIA-OPT-MIB
1.3.6.1.4.1.449.2.1.3.2.7.1.2cdx6500StatEIAEntryDimTypeEIA-OPT-MIB