EFM-COMMON-MIB :: dot3OamPeerVendorInfo

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EFM-COMMON-MIB › dot3OamPeerVendorInfo

dot3OamPeerVendorInfo

Module: EFM-COMMON-MIB

OID (symbolic): EFM-COMMON-MIB::dot3OamPeerVendorInfo

OID (numeric): 1.3.6.1.2.1.9908.1.2.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the Local Information TLV, and can be used to determine additional information about the peer entity. The format of the vendor information is unspecified within the 32-bit field. This value is intialized to all zeros (0x00000000). This value is invalid if the dot3OamPeerStatus is inactive.

An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs.

What is dot3OamPeerVendorInfo?

A vendor-defined 32-bit value from the peer's Information OAM PDU that can carry additional vendor-specific details about the remote OAM entity; its format isn't standardized, and it's invalid while dot3OamPeerStatus is inactive.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.9908.1.2.1.4
snmpwalk -v2c -c public <target> EFM-COMMON-MIB::dot3OamPeerVendorInfo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.9908.1.2.1.4.1
snmpget -v2c -c public <target> EFM-COMMON-MIB::dot3OamPeerVendorInfo.1

Start monitoring Ethernet access/carrier equipment supporting 802.3ah EFM OAM (vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EFM-COMMON-MIB::dot3OamPeerVendorInfo OID value, configure state conditions and alerts, and monitor any Ethernet access/carrier equipment supporting 802.3ah EFM OAM (vendor-neutral IETF standard) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.9908efmOamMIBEFM-COMMON-MIB
1.3.6.1.2.1.9908.1dot3OamMIBEFM-COMMON-MIB
1.3.6.1.2.1.9908.1.2dot3OamPeerTableEFM-COMMON-MIB
1.3.6.1.2.1.9908.1.2.1dot3OamPeerEntryEFM-COMMON-MIB
1.3.6.1.2.1.9908.1.2.1.4dot3OamPeerVendorInfoEFM-COMMON-MIB